Roland printer models and comparisons
Roland printer model comparisons: differences, print heads, running costs and which one to choose for your production.
- Starting a Sign Shop With a Used Roland: What to Check, Hidden Costs and How to Protect Your Investment
Starting a sign or print shop with a used Roland can be a great move or the start of a long headache. Here is what to look at before you buy, the costs nobody puts in the budget and why knowing maintenance is what protects your money.
- Roland Printing Cost per Square Foot: How to Calculate What Really Counts
A lot of shops price by the square foot looking only at ink and media, then find out at month end that the numbers don't add up. Here is how I think about the real cost per area of a Roland, including maintenance, waste and downtime, using your own numbers.
- Roland RS-640 vs RE-640: Real-World Differences, Who Each One Suits and What to Check Used
RS-640 or RE-640? Both are 64-inch eco-solvent printers that print only, but they come from different generations, and that changes ink, software and the used-market reality. I explain what actually sets them apart and how to choose without walking into a trap.
- Roland VS-640 vs VS-540: The Differences That Matter and Which to Buy Used
VS-640 or VS-540? Both belong to the same print and cut family, but width, floor space and the kind of work you run change the answer. I explain what actually sets them apart day to day and what to check before buying either one used.
- Roland VS-300 and VS-300i Common Problems: What Goes Wrong and How to Approach It
The VS-300 is the compact print and cut machine in the VS family, widely used for stickers and labels. I walk you through the problems I see most on it, from the head to fine-detail cutting, what you can safely check and when to stop working on it alone.
- Roland VS-540 and VS-540i Common Problems: What Goes Wrong and How to Approach It
The VS-540 is one of the most common print and cut machines in sign shops. I walk you through the problems I see most on it, including white and metallic ink, head strikes and contour cutting, what you can safely check and where the diagnosis needs a real method.
- Roland VP-300 Common Problems: Printing, Contour Cutting and How to Approach Each One
The VP-300 is the compact sibling of the VP-540 and still runs in plenty of small sign shops. I walk you through the problems I see most on it, how to separate head, ink, media and cutting issues, what to check safely and what to look at before buying one used.
- Roland SP-300 and SP-300V Common Problems: What Breaks and How to Approach It
The SP-300V is an older print and cut workhorse that still runs in plenty of sign shops. I walk you through the problems I see most on it, in printing and cutting, what you can safely check and when the age of the machine should change your repair decision.
- Roland SP-540V vs VP-540: Real Differences, Which Fits Your Shop and What to Check on a Used One
Torn between a used SP-540V and a VP-540? I compare them from the service bench: what they share, what changed between generations, which kind of shop each one suits, and why the machine's condition matters more than the model name.
- Roland RA-640 Water-Based Ink Care: Daily Routine, Media and Idle Time
Treating the RA-640 like a solvent Roland is the mistake I see most with this printer. I explain what changes in the routine of a water-based ink machine: drying, media choice, the room, cleaning, idle time and what you can safely check before you lose a head and a roll of media.
- Is It Worth Repairing an Old Roland Printer, or Time to Replace It?
Your SP-540V, VP-540 or another older Roland broke down and you cannot decide between repairing it and buying another one? From the service bench, I share the criteria I use, what argues for repair, what argues against and the traps on both sides.
- Roland RF-640 Common Problems: What Goes Wrong and How to Approach Each One
Own a Roland RF-640 or thinking about buying one? From the service bench, I walk through the problems that show up most on this production printer, from missing nozzles and drying to media feed and movement errors, what you can safely check and where the technical work begins.
- Buying a Used Roland Printer: What to Check Before You Pay (Head, Test Print, Pump, Rails and Cutting)
Buying a used Roland (SP, VP, VS, RS, RE, RF or RA-640)? Here is what to check during the visit, the red flags that should drop the price, and how not to bring home a machine that stops in the first month.
- Roland RA-640 Common Problems: What Goes Wrong and How to Approach Each One
Is your RA-640 dropping nozzles, banding, leaving wet prints, skewing media or throwing MOTOR ERROR? Here are the most common problems on this 64-inch water-based ink printer, how to spot each one and why copying another model's procedure is risky.
- Roland RE-640 Common Problems: What Goes Wrong and How to Approach Each One
Is your RE-640 dropping nozzles after sitting idle, banding, leaving wet prints, skewing media or showing panel errors? Here are the most common problems on this 64-inch eco-solvent printer and how far to go on your own.
- Roland VS-640 and VS-640i Common Problems: Printing, Cutting and Head Strikes
Is your VS-640 or VS-640i getting head strikes, cutting off the print on long jobs, dropping nozzles or banding? Here are the most common problems on this 64-inch print and cut, how to recognize each one and how far to go on your own.
- Roland RS-640 Common Problems: What Goes Wrong and How to Approach Each One
Is your RS-640 banding, dropping nozzles, leaving wet prints, skewing media or throwing carriage errors? Here are the most common problems on this production printer, how to recognize each one and how far to go on your own.
- Roland VP-540 and VP-540i Common Problems: Printing, Cutting and How to Approach Each One
Is your VP-540 or VP-540i dropping nozzles, banding, cutting off the print or throwing panel errors? Here is an owner's map of the most common problems on this print and cut, how to recognize each one and how far to go on your own.
- Roland SP-540V Common Problems: What Goes Wrong and How to Approach Each One
Your SP-540V started banding, dropping a color or cutting off the artwork? I explain the problems I see most on this machine, how to tell them apart by symptom, and what to check before replacing parts or buying a used one.
- Roland VS-640: Real Strengths, Day-to-Day Weak Points and What to Inspect Before Buying Used
Thinking about putting a Roland VS-640 or VS-640i in your shop? From the service bench, I explain where this print and cut machine shines in production, where it costs you, and what to inspect on a used one before you pay.
- Roland VP-540i Owner's Field Guide: Daily Care, Wear Points, Symptoms and When to Call a Tech
Living with a Roland VP-540i day to day: the routine that keeps it printing and cutting, the parts that wear first, how to read symptoms by subsystem and where the safe line is before you call a technician.
- Roland VP-540i vs VP-540: Which One to Buy Used for Your Print Shop, What to Inspect and the Red Flags
Choosing between a used VP-540i and a classic VP-540 for your shop? A technician's buying guide: which one fits which kind of shop, what to inspect before paying, the hidden costs after the purchase and the red flags that should end the deal.
- Roland "VP-640i" vs VS-640i: Comparing VP-Series and VS Print & Cut Machines in Practice
Searching for "VP-640i vs VS-640i"? From the service bench, I compare the Roland VP print and cut family (VP-540 and VP-540i) with the VS-640 and VS-640i: what they share, what changes in daily production and what to check before you buy.
- Roland RE-640 vs RF-640: What Really Changes in Production, Upkeep and on a Used Machine
Torn between a used Roland RE-640 and an RF-640? From the service bench, I explain what the two print-only machines share, where they really differ in day-to-day production and upkeep, and what to check before you pay.
- Roland VP-540i vs the Classic VP-540: What Actually Changed and What It Means in the Workshop
The VP-540i is a later revision of the VP-540 platform. Here is what a technician can say safely about the differences, how to confirm which one you have, and what the change means for firmware, RIP setup, parts and maintenance.
- Roland SP-300 to SP-300V: What Really Changes, the Risks and What to Check First
Thinking about turning your SP-300 into an SP-300V so you can run VersaWorks? Here is what actually changes between the old RIP workflow and the new one, why tired heads show up more, the risks of tinkering blind and what to verify before you decide.
Error codes · VersaWorks · Maintenance and inks · Print and cut