Master Print — Manual de Campo

Roland RA-640 Common Problems: What Goes Wrong and How to Approach Each One

Is your RA-640 dropping nozzles, banding, leaving wet prints, skewing media or throwing MOTOR ERROR? Here are the most common problems on this 64-inch water-based ink printer, how to spot each one and why copying another model's procedure is risky.

Your Roland RA-640 prints a TEST PRINT full of gaps, you go looking for help and all you find are videos about the RS-640, VP-540 or SP-540. You repeat the procedure, burn ink, and the machine stays the same. Sometimes it gets worse.

That's the mistake I see most with the RA-640: treating it like a different model. It's a 64-inch printer that prints only and runs water-based ink, and that changes how you read several symptoms. Here I lay out its most common problems, what usually sits behind each one and what you can check safely before the procedure I show in the Field Manual.

Does any of this sound familiar?

  • A nozzle check with gaps that don't change after cleaning.
  • Dropouts that clear after a cleaning and return a few hours later.
  • Regular bands running across the print.
  • Prints coming out wet or smearing as they roll up.
  • Media walking to one side or the carriage stopping on MOTOR ERROR.

First things first: know your unit

RA-640 configuration can vary by market and version. So before any diagnosis, I always check:

  • the machine's label and documentation, to confirm the exact version;
  • which ink is installed and which inks have been through it;
  • how long the machine sat idle and under what conditions;
  • the history of wiper, capping and head replacements, if there is one.

When an RA-640 lands on my bench: before any test, I confirm the version and which ink has been through it. A procedure that's right for another version or model may be wrong for yours, and on the RA-640 knowing the unit is step one of the diagnosis.


The most common Roland RA-640 problems

1. Missing nozzles and a color that disappears

The TEST PRINT shows gaps, one color looks weak or a channel is gone. Dried ink, a cap that doesn't seal and a saturated wiper are frequent suspects, especially on machines that sat idle. The cleaning station is key here, and I explain how it works in Roland wiper and capping station cleaning.

2. Dropouts that return right after cleaning

You cleaned, the check improved, and a few hours later the gaps were back. That pattern is almost never just a clog: it points to sealing, air entering the line or a damper. Running strong cleanings back-to-back here only wastes ink.

3. Banding

Regular stripes following the media feed, or irregular bands that move around. The first family points to feed and media settings; the second to unstable nozzles. If it's the regular kind, start with my Roland feed calibration guide.

4. Ink not drying or smearing

Wet prints, ink smearing or transferring to the back as it winds. With water-based ink, drying depends heavily on using media made for that type of ink, on room humidity and on how much ink the print mode lays down. If TEMPERATURE IS TOO LOW appears, treat it as a temperature-related warning: the room and/or the unit's heating, depending on its configuration, still below what's needed.

5. Skewed media and PINCH ROLL ERROR

Pinch rollers out of position, a poorly supported roll or media loaded at an angle make the media drift. On long jobs, that turns into wrinkles and the risk of head contact.

6. Carriage errors and MOTOR ERROR

A carriage that stops mid-pass, loses position, gets noisy or throws MOTOR ERROR. Obstructions, a dirty rail, encoder residue and tired cables belong here. See what this error usually points to in Roland MOTOR ERROR: real causes and safe checks.


Symptoms that help you tell problems apart

  • Always the same channel failing: nozzles, cartridge, damper or that color's line.
  • Several channels failing: capping, pump or wiper, which they all share.
  • Dropouts back hours after cleaning: sealing or air in the system.
  • Bands with constant spacing: media feed.
  • Smearing as it winds: insufficient drying.
  • New carriage noise: stop before it becomes a motor error or head strike.

An RA-640 that's down means production width that isn't billing and customers waiting.

Diagnosing nozzles, banding, drying and carriage errors in the right order, without copying another model's procedure, is exactly what I show on video in the Field Manual, on a real machine. See the Field Manual →


Basic, safe checks

Every physical inspection near the carriage, cleaning station or rollers should be done with the machine powered off and unplugged. Nothing here requires taking anything apart:

  • run a TEST PRINT and keep it as a reference;
  • make sure the waste bottle isn't full and the tube is clear;
  • look for visible dried ink on the wiper and caps;
  • check cartridge expiry and seating;
  • load media straight, with pinch rollers at the marked positions;
  • check the room temperature and humidity and that the media is suited to water-based ink;
  • make sure there are no objects, lint or media scraps in the carriage path.

Warning: don't force the carriage by hand and don't lubricate the rail or encoder on your own. On the RA-640, as on every Roland, those points have their own procedure.


Be careful copying procedures from other models

Because there's little RA-640-specific information, it's common for owners to watch a video about another Roland and repeat everything on their machine. Sometimes it works. Often it doesn't: the menu sequence, the cleaning station and ink behavior can differ, especially since the RA-640 runs water-based ink, not the same chemistry as the RS-640 and RE-640. And one step out of order around the head can get expensive.

The classic RA-640 owner mistake: watching a video about another Roland and repeating every step in the same order. Use other models to understand the logic of the problem, but only apply a procedure after confirming it fits your unit and the ink it runs.


How far to go on your own, and where the Field Manual comes in

Nozzle checks, correct loading, controlling the room and reading symptoms are within your reach. From there on, the RA-640 demands method:

  • proper cleaning station maintenance, without damaging the rubber parts;
  • how to handle a failing channel without stressing the head;
  • feed calibration per media, in the right order;
  • diagnosing air in the line and dampers;
  • how to investigate carriage and motor errors without touching what you shouldn't.

From here on, no improvising: these steps involve the head and the machine's mechanics, and one step copied from the wrong model turns an adjustment into an expensive repair. The full step-by-step lives in the Field Manual video lessons, on a real machine, with the right diagnostic logic and what not to do.

If your RA-640 is already dropping nozzles, banding or making noises, don't wait for it to stop completely with orders in the queue. Join the Field Manual and follow the protocol on video before the losses grow.


Frequently asked questions about Roland RA-640 problems

Frequently Asked Questions

1. Does the Roland RA-640 cut?

No. The RA-640 is a printer without cutting. For contour-cut graphics it needs to work alongside a separate vinyl cutter.

2. Can I follow RS-640 or RE-640 procedures on my RA-640?

The logic of the problems is similar, but menus, cleaning station and maintenance details may differ. Use other models to understand the problem and confirm the procedure for your unit before applying it.

3. Why does my RA-640 drop nozzles after sitting idle?

Because ink dries on the head face and caps when the machine isn't used, especially if it was unplugged. Cap sealing and a clean wiper make a big difference.

4. My RA-640 shows MOTOR ERROR. What do I do first?

Power off, unplug and check that nothing is blocking the carriage or the media. If the error comes back after restarting, the diagnosis involves mechanical and electronic points that shouldn't be touched by trial and error.

5. Is a used RA-640 worth buying?

It can be, as long as you see a nozzle check printed on the spot, a real print and confirm the machine's history. Since there's less information available about it, knowing how to evaluate and maintain the unit matters even more.

  • 🎥 Straight-to-the-point video lessons on a real machine
  • 🛠️ Roland 640-series diagnosis on a real machine
  • ⚡ Immediate access to content after confirmation
  • ♾️ Lifetime access to the Field Manual and future updates
Get My RA-640 Back on Track