Buying a Used Roland Printer: What to Check Before You Pay (Head, Test Print, Pump, Rails and Cutting)
Buying a used Roland (SP, VP, VS, RS, RE, RF or RA-640)? Here is what to check during the visit, the red flags that should drop the price, and how not to bring home a machine that stops in the first month.
The listing looks great: a Roland "working perfectly", nice photos, a price below the market. You're already running the numbers on what it'll bill in the first month. But on the used market, the same model can be a bargain or a money pit, and the difference almost never shows in the photos.
I've lost count of the used Rolands I've seen land on my bench right after the sale, with faults that could have been spotted during the visit. Here's what I check before anyone closes a deal, whether it's an SP, VP, VS, RS, RE, RF or RA-640. It isn't the full technical evaluation, but it's enough to walk into the visit knowing what to look at and what to ask.
Is this where you are right now?
- You found a listing that looks too good and don't know if you can trust it.
- The seller sent a photo of the nozzle check but keeps dodging a live print.
- You were told the fault is "just a cleaning" or "just a cut calibration".
- The machine sat for months and nobody can tell you how.
- You have no idea what whatever shows up after the purchase might cost.
First: know exactly which machine you're buying
Before the visit, confirm the model and what it does. That avoids surprises and guides your tests:
- RE-640, RS-640, RA-640 and RF-640 are print-only: for contour-cut graphics you will need a separate cutter;
- the RA-640 runs water-based ink, unlike the others on this list, so ink, media and maintenance follow a different logic;
- SP, VP and VS are print and cut: they print and cut, so cutting must be tested too;
- versions with an "i" or "V" in the name differ in generation, firmware and RIP compatibility.
Tip: if you're torn between two print-only 64-inch models, my comparison of the Roland RE-640 vs RF-640 helps you know what you're looking at.
The visit checklist
1. A nozzle check printed in front of you
This is item number one. Ask them to power the machine up and run the TEST PRINT while you watch. Be wary of a test that's "already printed" or a photo sent by message. Look for gaps, deflected nozzles and any weak color. Knowing how to read that check changes everything, and I explain how in how to read a Roland nozzle check.
2. A nozzle check after one cleaning
If the first check has gaps, ask for one normal cleaning and a new check. How the head responds says a lot: dropouts that clear with one cleaning are very different from dropouts that don't change at all.
A case I see all the time: the buyer shows up excited about the perfect nozzle check photo the seller sent. At the visit, the machine prints with gaps in two colors, and one cleaning changes nothing. That was a head at its limit: either the price dropped by the cost of a head, or the deal made no sense.
3. A real print
Bring your own file with solid color areas, gradients and small text. Banding, blotchy color, drops and smears show up far more on a real job than on the test.
4. Cleaning station and pump
With the machine off, look at the cleaning area: very dirty, dried-out or deformed caps and a saturated wiper mean maintenance has been neglected. During cleaning, notice whether ink actually flows to the waste bottle. A weak pump is a problem that never shows in the listing.
5. Rails, carriage and noises
Listen to the carriage as it moves. Scraping, jerks or unusual knocks deserve attention. Ask whether the machine has ever shown MOTOR ERROR or SERVICE CALL.
6. Media feed and pinch rollers
Check that the media feeds straight while printing, without drifting or wrinkling. Worn pinch rollers or skewed media may mean an adjustment, but they can also mean wear.
7. Cutting (print and cut only)
On SP, VP and VS models, ask them to print and cut a job with registration marks. See whether the machine reads the marks without a CROP-MARK ERROR and whether the cut follows the artwork from start to finish.
8. Heaters
Check that the heaters work and that prints come out dry enough to handle. On the RA-640, which runs water-based ink, drying depends heavily on the right media and the room, so test with the material you'll actually be using.
A poorly evaluated used Roland can cost you more in the first month than you saved on the purchase.
Evaluating the head, cleaning station and mechanics before you pay, and keeping the machine producing afterwards, is exactly what I show on video in the Field Manual, on a real machine. See the Field Manual →
Questions you should ask the seller
- How long has the machine been idle? Was it left powered or unplugged?
- Which ink is it running now, and which inks has it used? Was there an ink change? How was it done?
- Has the head ever been replaced? When and why?
- When were the wiper, caps and dampers last replaced?
- Does it come with a RIP (for example VersaWorks) and a compatible computer?
- What was the workload: daily production or occasional use?
Warning: a machine that has been sitting for a long time isn't necessarily bad, but it has to be brought back carefully, so factor that risk into the price.
Red flags that should drop the price (or kill the deal)
- a seller who won't let you print on the spot;
- several colors with gaps that don't improve after a cleaning;
- a carriage with loud noise or an error that appears during the test;
- caps and wiper badly degraded, a sign of abandoned maintenance;
- signs of head strikes or scraped media on the test prints;
- on a print and cut, a misaligned cut the seller "swears just needs calibrating".
What evaluating machines has taught me: any problem the seller calls "simple," price it as if it weren't. If it were simple, they'd have fixed it before selling.
How far to go on your own, and where the Field Manual comes in
The checklist above already separates a good machine from an obvious lemon. But there's a big difference between seeing a problem and knowing how much it will cost to fix. That's where many buyers go wrong:
- knowing whether a nozzle dropout is recoverable or a sign the head is done;
- judging whether the pump and capping are working as they should;
- telling whether a cutting problem is calibration or a part;
- setting up the right maintenance routine in the first week, so the machine doesn't repeat the previous owner's history.
What this article can't replace: the full technical evaluation and post-purchase maintenance involve procedures I show in the Field Manual video lessons, on a real machine: what to check, in what order and what not to do so you don't ruin a good machine in week one. For what typically goes wrong on an older print and cut, see the Roland SP-540V common problems.
If you're about to buy a used Roland, or just bought one, join the Field Manual before spending on parts or a technician. It's the cheapest way to protect your investment and start billing with confidence.
Frequently asked questions about buying a used Roland printer
Frequently Asked Questions
1. What is the most important thing to evaluate on a used Roland?
The condition of the head, seen on a nozzle check printed in front of you, and how it responds to a simple cleaning. It's the most expensive part of the machine and the one that most affects quality.
2. Is it worth buying a Roland that has been sitting idle for a long time?
It can be, but the risk is higher and should be reflected in the price. Dried ink in the head, caps and lines is common. Evaluate with a nozzle check and, if possible, after one cleaning.
3. How do I know if a used Roland can cut?
By the model: SP, VP and VS are print and cut. RE-640, RS-640, RA-640 and RF-640 print only. When in doubt, confirm with the machine's documentation before closing the deal.
4. Do I need to bring a technician to evaluate the machine?
It helps a lot, but it isn't always possible. If you know what to look at and what to ask, you can separate good machines from obvious lemons. The Field Manual shows on video the points a technician checks.
5. What should I do right after buying a used Roland?
Run a reference nozzle check, inspect the cleaning station, waste and ink, and set up a maintenance routine. The first week decides whether the machine makes money or causes headaches.
- 🎥 Straight-to-the-point video lessons on a real machine
- 🛠️ Learn to evaluate and maintain SP, VP, RS, VS, RE, RA and RF
- ⚡ Immediate access to content after confirmation
- ♾️ Lifetime access to the Field Manual and future updates