Print and cut with Roland printers
Print and cut with Roland printers: crop marks, calibration, contour cutting and settings for accurate cuts.
- Bleed for Roland Contour Cutting: Why You Get White Edges and How to Avoid Them
Contour-cut stickers coming out with a thin white sliver on one side, or the cut line biting into the artwork? It is almost always the relationship between bleed and cut line. Here is how the two work together on a Roland print and cut, plus the file mistakes I see most.
- Worn Roland Cutting Strip: Symptoms, Causes and Care on Print and Cut Machines
Is the blade cutting into the strip, slicing through the backing in some spots and barely scoring the vinyl in others? A worn cutting strip is often to blame. Here are the symptoms, what wears it out and how to make it last on the SP, VP and VS.
- Roland Print Cut Off at the Edge: Wrong Margins and Print Shifted on the Media
Artwork coming out with one side cut off, a bigger margin on one side or the print shifted on the media? From the workshop, I explain why the image gets cut off at the edge on your Roland and what to check in the file, in VersaWorks and on the machine.
- Cut Only on a Roland: Cutting Without Printing, Pre-Printed Media and the Traps
Want to use your VP, VS or SP just as a cutter, or cut media that was already printed and laminated? From the shop floor, I explain when cut-only jobs work well, where the traps are and what to check before you lose material.
- CutContour Cut Line in VersaWorks: Why It Is Not Recognized or Cuts in the Wrong Place
VersaWorks ignoring your cut line, printing a pink outline or cutting off the artwork? From the shop floor, I explain the most common mistakes when building a CutContour line in Illustrator and CorelDRAW, and what to check before blaming your Roland.
- Roland Cutting Tearing the Vinyl: Lifting Corners and Ruined Small Letters
Blade dragging the vinyl, corners lifting and small letters coming off with the weed? From the workshop, I explain why your Roland VP, VS or SP tears instead of cutting, what you can safely check today and what I keep for the video lessons.
- Roland Not Cutting All the Way Through: Incomplete Cuts and Skipped Lines
Blade scoring the vinyl but not cutting through, or skipping parts of the contour? From the service bench, I explain why cuts come out incomplete on Roland VP, VS and SP print-and-cut machines, what to check safely and why cranking up the force is rarely the answer.
- Roland Cutting Blade Guide: Blade Force, Offset and Depth for Clean Vinyl Cuts
Vinyl tearing while weeding, rounded corners, or the blade cutting through the backing? I explain how blade force, offset and depth work together on a Roland, how to spot a worn blade and how to read the test cut.
- Roland CROP-MARK ERROR Fix: Why Your Print and Cut Won't Detect Crop Marks
The sticker sheet printed perfectly, you send the cut and the Roland says CROP-MARK ERROR? I explain why the sensor can't find the marks (gloss, clear media, bright light, crooked reload) and what to check before wasting more vinyl.
- Print and Cut Alignment on the Roland VS-640 and VP-540: Why the Cut Lands Off the Print
The marks are read, the job runs, but the contour cut lands a few millimeters off the printed image. Learn how to tell a constant offset from a drift that grows along the roll, the families of causes on the VS-640 and VP-540 and what you can safely check.
Error codes · VersaWorks · Models and comparisons · Maintenance and inks