CutContour Cut Line in VersaWorks: Why It Is Not Recognized or Cuts in the Wrong Place
VersaWorks ignoring your cut line, printing a pink outline or cutting off the artwork? From the shop floor, I explain the most common mistakes when building a CutContour line in Illustrator and CorelDRAW, and what to check before blaming your Roland.
You lay out a sheet of stickers with care, a contour around every one, send it to VersaWorks and wait for the machine to print and cut. It prints... and when it's time to cut, nothing happens. Or worse: it prints a thin pink line around each sticker, right where it should have cut. Another day it cuts, but runs twice over the same path, or cuts offset from the artwork.
Most of the times someone calls me saying "the Roland stopped cutting," the machine is fine. The problem is a CutContour cut line that left Illustrator or CorelDRAW the wrong way. Here are the tips that fix it most often for VP-300/540/540i, VS-300/540/640/640i and SP-300/540V owners running VersaWorks. This isn't the full print-and-cut tutorial, that's on video in Manual de Campo, but it'll keep you clear of the most expensive mistakes.
Sound familiar?
- VersaWorks prints but doesn't cut anything.
- A pink line gets printed around the design.
- Some pieces cut and others don't.
- The machine cuts the same line twice.
- The cut comes out shifted or the wrong size.
How VersaWorks recognizes a cut line
VersaWorks doesn't guess what's meant to be cut. It looks in the file for a spot color named exactly CutContour, applied as a stroke on a vector. Anything in that color becomes a blade path and doesn't get printed. Anything else is treated as regular artwork and goes to print.
That gives you my favorite diagnostic tip: if a pink line got printed, VersaWorks did not recognize that color as a cut. It arrived as a normal print color, usually because the name or the color type got lost along the way.
The most common mistakes when creating the swatch
- A different name. "Cutcontour", "CUTCONTOUR", "Cut Contour" or "CutContour 1" are not the same name. Type exactly CutContour.
- Process color instead of spot. Making a regular magenta and just naming it isn't enough: the swatch has to be a spot color.
- Color on the fill instead of the stroke. The cut line is the vector's stroke, with no fill.
- A line that isn't a vector. A contour drawn as a bitmap, or one that got turned into an image on export, can't become a cut.
A shop tip: build the CutContour swatch once, save it in a template file and always start from there. People who recreate the color for every job eventually get a letter wrong.
Illustrator and CorelDRAW: where the line gets lost
The color can be right in your design software and still arrive wrong in VersaWorks. Where I see it happen most:
- Exports that convert spot colors to CMYK. In CorelDRAW especially, PDF or color management settings can quietly turn the spot into a process color.
- Effects and transparency. Drop shadows, transparency and effects on the same object can get the line flattened together with the art on export.
- A line buried in a clipping mask or complex group. A contour trapped inside a clipping mask or PowerClip sometimes doesn't come out as expected.
- Live text. To cut around text, the contour has to be a real vector, not an effect on the font.
If, after fixing the color, the cut happens but lands off from the print, that's a different subject: reading the registration marks. I cover it in the articles on Roland crop mark errors and print and cut alignment on a Roland.
A wrong cut line turns a full sheet of stickers into scrap, and nobody notices until the machine finishes.
Building the file right, exporting without losing the cut color and setting up the job in VersaWorks for your VP, VS or SP is exactly the workflow I show on video in Manual de Campo, from the computer to a sticker that weeds clean. Show me the full print-and-cut workflow →
When it cuts, but cuts wrong
Not every problem is the line going unrecognized. Sometimes it's recognized and the result is still bad:
- Double cut: there are two CutContour lines stacked on top of each other, common when the contour is copied and pasted or an auto-contour is applied twice.
- A white sliver at the edge: the line sits exactly on the edge of the art. In practice, extending the art slightly past the cut line (bleed) prevents that white edge.
- Wrong-size cut: only part of the file was scaled, or the job was resized after it was laid out.
- Skipped pieces: some contours ended up in another color or are open paths. If the machine also fails partway along the lines, see the article on a Roland not cutting all the way through.
Draw the line with the blade in mind
A cut line can be technically correct and still cause trouble on the machine and during weeding. A few design choices help a lot:
- smooth contours without excess nodes let the blade run without jitter;
- very tight inside corners and thin points are where vinyl lifts most; rounding them slightly helps;
- leave space between pieces on the sheet so weeding does not rip off the neighboring sticker;
- make sure every contour is closed before you export.
What to check in VersaWorks before you send it
- open the job and check in the preview that the cut lines show up as cuts, not as part of the artwork;
- make sure the job is set to print and cut, not print only;
- confirm there is no scaling in VersaWorks that differs from the file size;
- run a small test, one or two pieces, before releasing the whole sheet.
A typical shop story: an owner spent weeks convinced the blade was faulty because "sometimes it cuts, sometimes it doesn't." The files that cut came from an old template; the ones that didn't had been built from scratch, with the swatch name typed just slightly differently. Nothing on the machine was wrong.
How far to go on your own, and where Manual de Campo comes in
The tips above fix most cases of unrecognized lines, pink lines printed and double cuts. What stays in the course is the full workflow, which covers:
- building print-and-cut files with registration marks the way the machine reads them best;
- exporting from your software without losing spot colors or turning vectors into images;
- setting up the VersaWorks job for each type of material;
- telling a file problem from a machine problem when the cut lands off.
That step-by-step is what I show on video, on screen and on a real machine, in Manual de Campo.
If your Roland prints perfectly and the cut keeps coming out wrong, stop burning sticker sheets on tests. Get into Manual de Campo, follow the print-and-cut workflow on video and get the file right once, so every job after that cuts where it should.
Quick answers about CutContour lines in VersaWorks
Frequently Asked Questions
1. Why won't VersaWorks cut my CutContour line?
The most common reasons are a swatch name that isn't exactly CutContour, a process color instead of a spot color, the color applied to the fill, or an export that converted the spot color to CMYK.
2. Why did a pink line get printed on my sticker?
Because VersaWorks didn't recognize that line as a cut and treated it as a print color. Check the name, the color type and your export settings.
3. Does CutContour have to be magenta?
What VersaWorks reads is the name and the spot color type. Magenta is just a convention so you can see the line on screen.
4. Why does the machine cut the same line twice?
Usually there are two CutContour lines stacked in the file. Select the contours and check for duplicates on top of each other.
5. When is it worth following Manual de Campo?
When you want to stop wasting material on tests and master the whole workflow, from file to cut, with registration marks and VersaWorks setup. That is what I show on video, on a real machine.
- 🎥 Straight-to-the-point video lessons on a real machine
- 🛠️ Print-and-cut workflow for VP, VS and SP, from file to machine
- ⚡ Instant access as soon as payment is confirmed
- ♾️ Lifetime access to Manual de Campo and future updates