VersaWorks Media Settings for Banner and Vinyl: Why the Right Preset Changes Everything
Vinyl waving, banner coming out washed out, ink that won't dry on one material? Often it is the media preset. I explain what VersaWorks media settings control, why banner and vinyl need different recipes, and the mistakes I see most often in sign shops.
Ask a sign shop which media setting they use in VersaWorks and the answer is often "the one that has always worked". Banner, gloss vinyl, matte vinyl, perforated window film: everything goes through the Roland on the same preset. Until the day the vinyl starts waving, the banner comes out washed out, ink won't dry on a new material, or banding shows up out of nowhere.
It is one of the most common things I find on service calls, and the printer is usually fine: the recipe for the material is what's wrong. Here I explain what a media preset really controls, why banner and vinyl can't be treated the same, and which mistakes cost the most. Building and tuning each preset, screen by screen, is what the course covers.
Sound familiar?
- One preset for every material in the shop.
- Color shifts when you switch banner or vinyl.
- Ink that won't dry on just one type of media.
- Banding that only shows up on one material.
- A list of duplicate presets and nobody knows which is right.
What a media setting in VersaWorks actually is
When you pick a media in VersaWorks you are not just picking a name from a list. Depending on the printer model and software version, that setting bundles or connects to several decisions at once:
- color management: which ICC profile translates the file's colors for that ink on that material;
- ink amount the material can take without running, smearing or drying too slowly;
- print mode and quality, which set passes, speed and finish;
- heat and drying, on models and versions where those settings are tied to the preset;
- media feed, which has to match the thickness and behavior of the material.
In other words: the media preset is the "recipe" for that material. Using the wrong recipe is like baking bread at pizza temperature. Sometimes it comes out, but it never comes out right.
Why banner and vinyl need different settings
Banner
Banner is thicker, has an internal scrim and a surface that varies a lot between manufacturers. Some banners take plenty of ink, others spread the dot and leave color soft and blurry. Banner also reacts to heat and tension differently from vinyl and is often run in faster production modes.
Vinyl
Adhesive vinyl is thinner and more heat-sensitive. It can wave, stretch or wrinkle if the setting does not respect its limits. Gloss and matte vinyl also behave differently in color and drying. And cut vinyl with a liner adds the print-and-cut challenge on top.
Other media
Photo paper, backlit film, perforated film, fabric, canvas: each has its own absorption, thickness and heat sensitivity. That is why VersaWorks works with the idea of one setting per material, not one for everything.
What I tell every customer: if you switch supplier or media line, treat it as a new material. Even with the same product name, the behavior can change.
The most common media setting mistakes
- using one generic preset for everything and fixing color in the file job after job;
- choosing a profile built for another ink, especially after switching to third-party ink;
- changing settings directly on the job and never saving a preset, so the good setup is gone the next day;
- duplicating presets without clear names until nobody knows which one is right;
- mixing panel settings with VersaWorks settings without knowing which one wins;
- skipping feed calibration when changing material, as I explain in the Roland feed calibration guide.
The cost: each of these mistakes looks small, but together they add up to wasted media, wasted ink and rework. A typical case: a customer calls me sure the head is failing because "only the matte vinyl prints badly". I open VersaWorks and the job is going out on the banner preset. Because the problem changes from one material to another, it feels like the machine is broken, and it isn't.
A wrong media preset is a silent loss: you only notice once the job is already printed.
Choosing, building and organizing presets for banner, vinyl and other materials, with the logic behind each setting, is exactly what I show on video in the Field Manual, using the real VersaWorks screens with the printer running. Get every media setting right →
Signs your media preset is wrong
- colors that do not match the screen or change from one media to another, which I cover in VersaWorks wrong colors and ICC profiles;
- ink that will not dry or stays tacky on one specific material (see Roland ink not drying);
- vinyl waving on the platen while printing;
- banding that only shows up on one type of media;
- color that looks washed out or runs in solid areas.
Basic, safe checks before you print
These checks do not permanently change anything, and they prevent most problems:
- Check which media and profile are selected on the job in the queue before you send it.
- Make sure the profile is for the ink actually installed in the printer.
- Keep a simple list, on the wall or on the PC, of which preset to use for each material in the shop.
- Give presets clear names (material, supplier, finish).
- When a new media arrives, run a small test before the big job.
- Keep a printed reference sample for every preset.
Result: fewer surprises, less rework and a workflow anyone on the team can repeat.
How far to go on your own, and where the Field Manual comes in
Choosing the right preset and organizing your media library is something you can already do with the tips above. What comes next is best seen in action:
- creating a new setting for a material that is not on the list;
- understanding how preset, ICC profile, mode and heat relate on your model;
- tuning feed and drying per material without losing productivity;
- deciding when to use the media maker's profile and when not to.
Building a setting from scratch, knowing which value wins on your model and tuning feed and drying without losing production are things you learn by watching the screens and the result on the media. That is all in the Manual de Campo (Field Manual) video lessons, with the order of each adjustment and the reason behind every choice. If you still print everything on one preset, every job is a gamble: join the Field Manual today and turn media setup into a process, not luck.
Frequently Asked Questions
1. Can I use the same preset for banner and vinyl?
It will print, but it is not recommended. Banner and vinyl differ in absorption, thickness and heat sensitivity. One setting for both usually means wrong color, poor drying or waving media on one of them.
2. Where can I find profiles for the media I use?
Many media and ink manufacturers provide profiles for Roland printers, and VersaWorks also ships with profiles of its own. What matters is that the profile matches the ink and the material you actually run.
3. I switched to third-party ink. Do I need to change my settings?
In most cases, yes. The original profiles were built for the original ink. With another ink you should use a profile made for it, or color will likely come out different than expected.
4. Are heater settings in VersaWorks or on the printer panel?
It depends on the model and version. Sometimes the setting lives on the printer panel, sometimes it can come from the media setting. Knowing which one takes priority on your machine avoids confusion.
5. Do I need to recalibrate feed every time I change media?
Whenever the material has a different thickness or behavior, it is worth checking. Wrong feed causes banding and inaccurate sizes even with a perfect head and perfect color.
- 🎥 Video lessons with real VersaWorks screens
- 🗂️ Banner, vinyl and other media presets explained hands-on
- ⚡ Immediate access to content after confirmation
- ♾️ Lifetime access to the Field Manual and future updates