Master Print — Manual de Campo

Roland Faded Prints: Why Colors Come Out Light, Washed Out and Dull

Red came out pink, black turned gray and the whole piece looks washed out? From years at the bench, I explain the real causes of faded Roland prints (nozzles, ink, print mode, media profile and heaters), how to tell them apart and why editing the file does not solve it.

"The head must be dying." That is usually the first thing I hear when a Roland starts printing pale, washed-out color: the bold red the customer approved comes out pink, the black looks like charcoal gray, and the whole banner has no punch and no contrast. Then the owner opens the file and cranks up the saturation.

I get this call all the time, and the head is rarely the real culprit, and the file almost never is. Faded output on a Roland eco-solvent printer has a physical or settings-related cause, and simple checks will point to it. Here I show you how to separate nozzles, ink, print mode, profile and heat before you waste more media reprinting blind. The fine-tuning of each one is what I show in the course.

Sound familiar?

  • Black coming out grayish or brownish.
  • Reds turning pink or orange.
  • The whole print looks flat, dull and low-contrast.
  • Color dropped right after you changed media or ink.
  • You pushed saturation in the file and nothing changed.

Faded off the printer or fading over time?

First question: did the print come out weak right away, or did it look fine and lose color after weeks outdoors? Those are very different problems:

  • weak right off the printer: a printing issue (ink, nozzles, mode, profile, heat). That is what this article covers;
  • faded over time: now you are dealing with ink and media lightfastness, missing lamination and the type of application. Ink and profile still matter, but the diagnosis is different.

A habit I teach every customer: keep a small sample of every job in a dark drawer. If the customer's piece fades, you compare it to the sample and know immediately whether it was a printing or an exposure problem.


The 5 most common causes of faded Roland prints

1. Missing nozzles in one or more colors

When a color has lots of missing nozzles it simply lays down less ink. That does not always show up as a white line: often the whole color is weaker and shifts the image tone. Black turning brown or red turning orange usually starts here. The first step is always a nozzle check, and I explain how to read it in how to read a Roland nozzle check.

2. Old, badly stored or unshaken ink

Eco-solvent ink carries pigment that can settle over time. A cartridge stored somewhere hot, past its date or left sitting without being shaken (when the ink maker recommends it) can deliver weaker color at first. Switching ink brands without a proper changeover also affects density.

3. A print mode that is too fast

High-speed modes use fewer passes and, depending on settings, less ink per area. They are great for production, but on some media they produce a more open, lighter color. Changing mode helps in some cases, but choosing the right mode for each material is a balance between speed, quality and ink use.

4. The wrong media profile in VersaWorks

This is the number one culprit. The media preset and ICC profile tell the printer how much ink to lay down and how to translate the file's colors. A profile built for different media, a generic preset or a profile made for another ink will wash out color even with a perfect head. If your colors do not match the screen, also read VersaWorks wrong colors and ICC profiles.

5. Heaters that do not suit the media

Heaters affect how the ink settles and dries on the surface. Heat that does not suit the material can change dot spread, gloss and the apparent density of the color. When the ink is also slow to dry, the two issues are usually connected: see Roland ink not drying and heater settings.


Why pushing color in the file makes things worse

When prints come out faded it is tempting to compensate in CorelDRAW, Illustrator or Photoshop. The problem is that you are fixing the symptom in one file, not the cause. The next job comes out weak again, and the "fixed" file may print oversaturated once the machine is back to normal.

Even worse: if the cause is missing nozzles, pushing saturation just asks for more ink from nozzles that are not firing properly. You use more ink and the color is still wrong.

A faded print is a guaranteed reprint: you pay for media, ink and the deadline twice.

Figuring out in minutes whether weak color comes from nozzles, ink, mode, profile or heat, and setting up media presets in VersaWorks without guessing, is exactly the diagnosis I show on video in the Field Manual, on a real machine. Get my Roland's colors back →


Basic, safe checks to separate the causes

None of these require taking anything apart, and they solve or point the way in most cases:

  • Print a nozzle check and look at it color by color. If one color has many gaps, start there.
  • Check the expiry and condition of the cartridges and whether the installed ink is the one the profile was built for.
  • Look at which media preset and profile are selected for the job in VersaWorks. Do they match the material on the printer?
  • Compare the print mode of the faded job with one that came out right on the same media.
  • Make sure the heaters are on and stable before you start printing.
  • Print a small reference file that never changes (a strip of solid colors) and keep it for future comparison.

Quick read: good nozzle check + wrong preset = a setup problem. Gaps in one color = a head or ink problem. Everything checks out and it is still weak = time to look more carefully at profile, mode and heat.


When the media is to blame

Not every media takes the same amount of ink. Cheaper banner material without a proper receptive surface can absorb or spread the ink in a way that leaves color dull and thin. Vinyl from a different line with a different finish also changes the result. That is why profiles and presets need to be built per material, not one for everything.

A case I see over and over: a shop switches banner suppliers to save money, keeps using the same old preset and, a week later, calls me saying the head is weak. The nozzle check is perfect. The head was never the problem; the new media needs a different profile. If color dropped right when you changed material, start your investigation there.


How far to go on your own, and where the Field Manual comes in

The checks above tell you whether weak color comes from the head, the ink or the setup. What comes next is something you need to see done:

  • properly recovering missing nozzles without wasting ink on panic cleanings;
  • choosing the print mode for each type of job and media;
  • creating and organizing media presets in VersaWorks;
  • setting heat that makes sense for each material.

From here on you are into settings that change from machine to machine and media to media, and that is where guessing gets expensive. The screens, the reference values and the right order of adjustment are in the Manual de Campo (Field Manual) video lessons, recorded on a real machine. If you have already reprinted a job because of washed-out color, join the Field Manual today and stop paying twice for the same work.


Frequently asked questions about faded Roland prints

Frequently Asked Questions

1. Why is the black on my Roland printing gray?

The most common causes are missing black nozzles, old or settled black ink and a media profile that limits ink load too much. Start with a nozzle check and then review the preset used for the job.

2. Does switching to a higher-quality mode fix weak color?

Sometimes it helps, because more passes usually lay the ink down more evenly. But if the cause is nozzles, ink or the wrong profile, the mode alone will not fix it and you just lose speed.

3. Can I use the same profile for banner and vinyl?

It is not ideal. Each material absorbs and reflects ink differently. Using one profile for everything is one of the most common causes of washed-out or oversaturated color.

4. Can third-party ink cause faded prints?

It can, if the profile in use was built for a different ink or the ink changeover was not done properly. Good third-party ink works well, but it needs a matching profile.

5. How do I know if it is the head or the settings?

Use the nozzle check. If it is complete and clean, the head is delivering ink and the issue is likely the preset, profile, mode or heat. If there are gaps, start with the head.

  • 🎥 Real-machine video lessons, no fluff
  • 🎨 Nozzles, print modes and media profiles explained hands-on
  • ⚡ Immediate access to content after confirmation
  • ♾️ Lifetime access to the Field Manual and future updates
Get My Roland Colors Back